Nortel BCM Media Bay Modules

Click here for a Quote on the Nortel BCM Media Bay Modules you require:

BCM 4x16 Combo | BCM 8x16 Combo | BCM DTM | BCM GATM4 | BCM GATM8
BCM DDIM | BCM ASM8 | BCM CTM4 | BCM CTM8 | BCM BRI-4 | BCM ADID4
BCM ADID8 | BCM DSM16+ | BCM DSM32+ | BCM GASM8 | BCM FEM
BCM 50 Expansion | BCM Expansion | BCM Expansion-Universal
BCM Expansion-Redundant | BCM DS256 Cable

Nortel BCM Media Bay Modules

The Nortel BCM 50 and 450 can be expanded in numerous ways with Nortel Media Bay Modules.

Nortel BCM 50/450 Media Bay Modules include: 4x16 Combo, 8x16 Combo, ADID4 and ADID8, ASM8+, CTM4 and CTM8, DTM, DDIM, BRI, DSM16+ & DSM32+, GATM4 and GATM8, GASM8, R2MFC, and FEM.

Nortel Media Bay Modules serve a variety of Expansion requirements. From a basic BCM Expansion Cabinet (Chassis) to expansion cabinets with various Power Supply options, including BCM Expansion Universal Power and BCM Expansion Redundant Power models.Expansion Cabinets are connected to the main BCM system base unit with a DS256 cable.

If you would like to purchase or discuss the Nortel BCM Media bay Modules for Nortel BCM 50 / 450 in greater detail then please contact us TOLL FREE at 1-855-929-9199 as we will only be too happy to help.

Nortel BCM Combo Trunk/Station Media Bay Modules:

Quantity

Product Description

Nortel BCM 4x16 COMBO Media Bay Module
(NT5B42AAAA, NT5B42AAABE5, NT5B42AAAFE5)

The BCM 4x16 Combo Media Bay Module provides connections for four analog trunk lines and 16 digital telephones. Each of the four analog trunk lines support caller ID and disconnect supervision. An auxiliary port next to the Line 1 port enables you to use an analog telephony device, such as a modem, fax, or telephone, to share the trunk. (more...)

Nortel BCM 8x16 COMBO Media Bay Module
(NT5B42AAACE5)

The BCM 8x16 Combo Media Bay Module provides connections for 8 analog trunk lines and 16 digital telephones. Each of the eight analog trunk lines support caller ID and disconnect supervision. An auxiliary port next to the Line 1 port enables you to use an analog telephony device, such as a modem, fax, or telephone, to share the trunk. (more...)

 

Nortel BCM Trunk Media Bay Modules:

Quantity

Product Description

Nortel BCM DTM Digital Trunk Media Bay Module (T1/PRI)
(NT5B04AAAD, NT5B04AAADE5)

The BCM Digital Trunk Media Bay Module (DTM) connects to a standard digital PSTN T1/fT1, E1/fE1, or PRI ISDN line using either a digital or PRI line. Also supports DASS2, DPN22, Q.SIG, and MCDN over ISDN. On North American BCM systems, the DTM connects a T1 or PRI circuit to the BCM system; T1 circuits provide 24 digital channels to the PSTN, while PRI circuits provide 23 digital channels to the PSTN. The front bezel of the DTM has an RJ-48C connector that connects the DTM to the service provider connection point. The faceplate also has a set of monitor jacks you can use to monitor the span. (more...)

Nortel BCM GATM4 - 4 Port Global Analog Trunk Media Bay Module
(NT5B44BAABE5, NT5B44BAAA)

The BCM Global Analog Trunk Media Bay Module (GATM4) provides an interface for four analog public switched telephone network (PSTN) lines. Supports both pulse and tone dialing, as well as caller ID and disconnect supervision. (more...)

Nortel BCM GATM8 - 8 Port Global Analog Trunk Media Bay Module
(NT5B44AAABE5, NT5B44AAAA)

The BCM Global Analog Trunk Media Bay Module (GATM8) provides an interface for eight analog public switched telephone network (PSTN) lines. Supports both pulse and tone dialing, as well as caller ID and disconnect supervision. (more...)

Nortel BCM CTM4 CLID Trunk Media Bay Module
(NT5B18AAAD)

The BCM CTM4 CLID Trunk Media Bay Module connects up to four analog CLID PSTN lines to the BCM system. One auxiliary ports permit the connection of a 33.6+ Kbps modem, fax machine or single line analog telephone to line 1. When the auxiliary device is using line 1, the BCM system does not allow other telephones to use line 1. When a single line analog telephone is connected to the auxiliary port, it can be used as an emergency telephone. (more...)

Nortel BCM CTM8 CLID Trunk Media Bay Module
(NT5B18ABAA)

The BCM CTM8 CLID Trunk Media Bay Module connects up to eight analog CLID PSTN lines to the BCM system. Two auxiliary ports permit the connection of a 33.6+ Kbps modem, fax machine or single line analog telephone to line 1 or 5. When the auxiliary device is using line 1 or 5, the BCM system does not allow other telephones to use line 1 or 5. When a single line analog telephone is connected to the auxiliary port, it can be used as an emergency telephone. (more...)

Nortel BCM DDIM Digital Drop & Insert MUX Media Bay Module
(NT5B52AAAA)

The BCM Digital Drop & Insert MUX Media Bay Module (DDIM) enables a BCM system to share its connection to a universal T1 network with a local area network (LAN) to provide a combination of voice and data channels. Provides the functionality of a DTM (T1 digital lines only). Splits the incoming T1 line so that some of the lines are used for voice traffic and some of the lines are used for data traffic. (more...)

Nortel BCM BRI-4 S/T - 4 Port BRI Media Bay Module
(NT7B76AAAH)

The BCM BRI4 4-Port BRI Media Bay Module (NT7B76AAAH) provides 4 ports of BRI with a S/T Interface to your Nortel BCM platform. Supports four S/T interfaces (8 B-channels); Supports ETSI and National ISDN BRI; Utilizes 1/3 DS-30. (more...)

Nortel BCM ADID4 Analog DID Media Bay Module
(NT9T23AAABE5)

The BCM Analog DID Media Bay Module (ADID4) MBM provides an interface for four or analog public switched telephone network (PSTN) lines. Supports both pulse and tone dialing as well as disconnect supervision, and direct inward dialing call progress signaling as described in standard TIA-464C. (more...)

Nortel BCM ADID8 Analog DID Media Bay Module
(NT9T23AAAAE5)

The BCM Analog DID Media Bay Module (ADID8) provides an interface for eight or analog public switched telephone network (PSTN) lines. Supports both pulse and tone dialing as well as disconnect supervision, and direct inward dialing call progress signaling as described in standard TIA-464C. (more...)

 

Nortel BCM Station Media Bay Modules:

Quantity

Product Description

Nortel BCM DSM16+ Digital Station Media Bay Module
(NT7B08AAAL, NT7B08AAALE5)

The BCM Digital Station Module DSM16+ supports 16 digital telephones through one RJ-21 connector. Set the double density switch to enable the DSM to carry 16 extensions over a half DS30 bus. If required, install a second DSM16(+) and set the double density switch to occupy the second half of the DS30 bus to expand the number of extensions to 32. (more...)

Nortel BCM DSM32+ Digital Station Media Bay Module
(NT7B09AAAD, NT7B09AAADE5)

The BCM Digital Station Module DSM32+ supports 32 digital telephones through one RJ-21 connector. A DSM32(+) operating in single-density mode occupies two DS30 buses. Set the double density switch to enable the DSM to carry 32 extensions over a single DS30 bus. (more...)

Nortel BCM ASM8+ Analog Station Media Bay Module
(NT5B16AAAE, NT5B16AAAJN)

The BCM Analog Station Media Bay Module (ASM8+) can connect to a maximum of eight analog telecommunication devices. Devices include standard analog telephones, cordless telephones, fax machines, answering machines, or modems (maximum speed for a modem connection is 28.8 kbit/s). (more...)

Nortel BCM GASM8 Analog Station Media Bay Module
(NT5B16AAAJE5)

The BCM Analog Station Media Bay Module (GASM8) can connect to a maximum of eight analog telecommunication devices. Devices include standard analog telephones, cordless telephones, fax machines, answering machines, or modems (maximum speed for a modem connection is 28.8 kbit/s). (more...)

 

Nortel BCM Expansion Module, Cabinets, DS256 Cable:

Quantity

Product Description

Nortel BCM (FEM) Fibre Expansion Media Bay Module
(NT7B07AAAC)

The BCM Fiber Expansion Media Bay Module (FEM) connects a maximum of six Norstar expansion units to the BCM system. These connections provide a quick way to upgrade a Norstar system to a BCM system. The front bezel of the FEM has six connectors. These connections are made using fiber cables between the FEM module and the Norstar expansion unit. (more...)

Nortel BCM 50 Expansion Cabinet
(NT9T6400, NT9T6402E5)

The BCM 50 Expansion Cabinet is a compact unit that accommodates the Media Bay Modules used by other BCM platforms. The BCM50 main unit can support a maximum of two expansion unit. Expansion ports on the BCM50 are enabled through keycode. Each expansion unit is capable of supporting one Media Bay Module. (more...)

Nortel BCM Expansion Cabinet
(NT7B14AAAF)

The BCM 450 Expansion Cabinet is a cost-effective way to increase the capacity of the Business Communications Manager (BCM). Connection is via a DS256 Cable directly from the Media Services Card to the Expansion Cabinet. The Expansion Cabinet is Backwards-Compatible with earlier BCM Releases. It also contains a Cooling Fan, a Power Supply, and a Hub Card. Includes 5m cord for connecting to BCM. Note: Does NOT support DTI or DDIM Media Bay Modules. (more...)

Nortel BCM Expansion Cabinet with Universal Power Supply UPS
(NT7B14AAAE)

The BCM 450 Expansion Cabinet with Universal Power Supply is a cost-effective way to increase the capacity of the Business Communications Manager (BCM). Connection is via a DS256 Cable directly from the Media Services Card to the Expansion Cabinet. The Expansion Cabinet is Backwards-Compatible with earlier BCM Releases. It also contains a Cooling Fan, a Power Supply, and a Hub Card. Includes 5m cord for connecting to BCM. Note: Does NOT support DTI or DDIM Media Bay Modules. (more...)

Nortel BCM Expansion Cabinet with Redundant Power Supply
(NTPW0120)

The BCM 450 Expansion Cabinet with Redundant Power Supply is a cost-effective way to increase the capacity of the Business Communications Manager (BCM). Connection is via a DS256 Cable directly from the Media Services Card to the Expansion Cabinet. The Expansion Cabinet is Backwards-Compatible with earlier BCM Releases. It also contains a Cooling Fan, a Power Supply, and a Hub Card. Includes 5m cord for connecting to BCM and Redundant Power Supply. Note: Does NOT support DTI or DDIM Media Bay Modules. (more...)

Nortel DS256 Cable
(NTAB3304)

The Nortel Expansion Cabinet DS256 Cable (NTAB3304), is required for connection of an Expansion Cabinet to your BCM. The DS256 is a 16 ft. V.24 Data Transfer Cable; Cable Type - V.24; Length - 16.4 ft.; Package Quantity - 1; Right Connector Type - D-Sub; Right Gender - Female. (more...)

 

The Nortel BCM Media Bay Modules offer Expansion of Trunks, Stations, Fibre connection to Nortel Norstar Modules, and much more!

We can source any item, even from brands that are not represented on our website.